Bach Run Equipment

Silage Facer - Bucket Mount   Minimum 20 GPM required  Maximum flow 40 GPM  Facing drum mounted on bucket  400 Brinell high tensile steel teeth on drum  Dual drive motors  Heavy du...

Silage Facer - Frame Mount   Minimum 20 GPM required  Maximum flow 40 GPM  Facing drum mounted on a 4 ft frame  400 Brinell high tensile steel teeth on drum  Includes hose kit and flat-...

Silage Grapple Bucket   Heavy duty grapple integrated into the bucket design  Strategic pivoting arc design on the grapple for more power and less disturbance of the bunk silo face  3 X 16 cylind...

Single Arm Log Grapple   Removable log grapple for pallet forks  Clamps onto Class II or III fork frame (walk through guards only)  C/w Hydraulic cylinder           ...

Single Prong Bale Spear   Kverneland tine  Easy stabbing & removal  2000 lbs capacity @ 24" L.C.  Available with 39" or 49" tine  Two stabilizer tines  Approxima...

Single Prong Bucket Spear   Kverneland tine  2000 lbs capacity @ 24" L.C.  Adaptable to most buckets  No tools or bolts needed  Comes with chain & tightener  Approximate w...

Single Three Point Hitch Spear   Reese receiver / ball hitch (Ball hitch not included)  Fits both CAT I & II  Kverneland tine  2 stabilizer tines  2000 lbs capacity @ 24" L.C.&...

       Skidsteer Grader   Push-pull design for grading in forward or reverse  Pneumatic swivel wheels on oscillating front axle  Extendable front axle bolster for better stabi...

Square Bale Grapple (BG6000)   Same specs and design as round bale grapple with arms to accept square bales 4 - 6 ft long and round bales 5-6 ft diameter  Opens up to 84"  Approximate weight...

Square Bale Squeeze (BG7000)   86" extended – 30" Retracted  Arms are 50” long, 20” tall  2-½" x 28" stroke cylinder  Slim brace arm design allow...

      Standard (Front End Loader) Bucket & Regular Utility Grapple   Standard (Front End Loader) Bucket & Regular Utility Grapple  Opens up to 70"  Comes with 2-&frac1...

       Standard (Skidsteer) Bucket & Regular Utility Grapple   Standard (Skidsteer) Bucket & Regular Utility Grapple  Opens up to 70"  Comes with 2-½"...

        Standard Front End Loader Bucket - HEAVY DUTY   HEAVY DUTY  ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top...

        Standard Front End Loader Bucket - REGULAR DUTY   REGULAR DUTY  3/16" material, ¼" end plates  ¾ X 4 bevelled cutting edge  Reinforced top...

Standard Skidsteer Bucket & Skidsteer Grapple   Designed for use on skidsteers with limited clearance for grapple arms  Comes with 2-1/2" x 8" cylinders         ...

       Standard Skidsteer Bucket - HEAVY DUTY   HEAVY DUTY  ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top lip&nbs...

        Standard Skidsteer Bucket - Long Lip (Heavy Duty)   1/4" material, 1/4" end plates  3/4 X 6 bevelled cutting edge  Reinforced top lip  40" deep, 24...

      Standard Skidsteer Bucket - REGULAR DUTY   REGULAR DUTY  3/16" material, ¼" end plates  ¾ X 4 bevelled cutting edge  Reinforced top lip...

      Stone Fork (Cranked Kverneland Tine)   39" Conus II cranked Kverneland tines (32" useable length)  Tines installed on 4" centres  Ruggedly built  Heavy du...

       Stone Fork (Landscape with Power Rake)   ¾" shaft diameter  1-¾" spacing between tines  Points are ½" thick, 400 Brinell high streng...

     Stone Fork (Retainer Style Tine) - HEAVY DUTY   HEAVY DUTY  1-¾" shaft diameter  2-¾" spacing between tines  Points are ¾" thick, 400 ...

   Stone Fork (Retainer Style Tine) COMPACT DUTY   1" Shaft diameter  2-½" spacing between tines  Points are ⅝" thick, 400 Brinell high strength steel  23&q...

   Stone Fork (Retainer Style Tine) REGULAR DUTY   REGULAR DUTY  1-¼" shaft diameter  2-½" spacing between tines  Points are 5/8" thick, 400 Brinell hi...

  Stone Fork (Retainer Style Tine) with Split Grapple - HEAVY DUTY   HEAVY DUTY - UP TO 9500 LB CAPACITY  Two independent grapples  Ideal for brush & rock clean up  Ideal for awkwar...

 Stone Fork (Retainer Style Tine) with Split Grapple - REGULAR DUTY   REGULAR DUTY - UP TO 5500 LB CAPACITY  Two independent grapples  Ideal for brush & rock clean up  Ideal for awk...

       Telescopic Handler Bucket - EXTRA HIGH VOLUME   ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top lip  55"...

       Telescopic Handler Bucket - HIGH VOLUME   ¼" material, ¼" end plates  3/4 X 6 bevelled cutting edge  Reinforced top lip  47" deep, 41&...

        Telescopic Handler Bucket - STANDARD   3/16" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top lip  43" deep, 35&q...

       Three Point Hitch Adaptor   Adapter attaches to loader then allows you to hook up to three point hitch equipment  Bottom two arms slide for easy hook-up  Comes with Ree...

Three Prong Bale Spear   Kverneland tines @ 23" spacing  Made to handle large 4' x 4' x 8' square bales  Not to be used for carrying 2 bales stacked on top of each other  Av...

Three Prong Bale Spear c/w Guard   Kverneland tines @ 23" spacing  Made to handle large 4' x 4' x 8' square bales  Available with 32", 39" or 49" tines  Frame...

Three Prong Bale Spear c/w Adjustable Guard   50" high frame with adjustable guard posts for safe handling of large square bales up to 3 high  Safety foot for roll over protection while in storag...

       Tilt Attachment   Great for Landscapers  Mounts between skidsteers and buckets with universal hitch  Hydraulic Tilt 18° left and right  5500lb capacity  &...

Tooth Bar Bolt-on  Designed to fit HLA bucket with tapered end plates  Easy to remove replaceable teeth           ...

Hydraulic Stand  20 ton trailer style running gear  Road Flex Suspension  Fixed Bolsters 11'2"  Safety Chain (1/2" GR. 70)  Disc brake flanges  Tongue Suspension  &nb...

20 ton trailer style running gear  Hubs - 8 Stud  Heavy Duty Jack  Safety Chain (1/2" GR. 70)  Disc brake flanges           ...

Hydraulic Stand  24 ton trailer style running gear  Road Flex Suspension  Fixed Bolsters 11'2"  Safety Chain (5/8" GR. 70)  Disc brake flanges  Tongue Suspension  &nb...

24 ton trailer style running gear  Hubs - 10 Stud  Heavy Duty Jack  Safety Chain (5/8" GR. 70)  Disc brake flanges           ...

        Trailer Hitch 2 inch Receiver   2" Receiver  Ideal for moving light trailers around the yard  Ball hitch mount on top of frame for moving goose neck trailer&...

         Tree Spade   Ideal for transplanting trees and shrubbery  Scoop made from ¼" material  33" wide  48" deep  Note: For skidsteers o...

       Weld-on Kits   Weld-on kits are one or two pieces, depending on loader mount configuration  ...

The Accelerator's easy operation conditions hay by simply running it through adjustable steel crimping rollers, up to 15 mph. This process cracks the hay stems without knocking off the leaves. Conditioning also fl...

The Accelerator's easy operation conditions hay by simply running it through adjustable steel crimping rollers, up to 15 mph. This process cracks the hay stems without knocking off the leaves. Conditioning also fl...

The Tubeline Accumul8 gives producers time-savings for one of farmings biggest jobs. The Accumul8 is your solution for handling bales efficiently - saving you time and man power. You can now handle eight, ten or twelv...

The Tubeline Accumul8 gives producers time-savings for one of farmings biggest jobs. The Accumul8 is your solution for handling bales efficiently - saving you time and man power. You can now handle eight, ten or twelv...

The Tubeline Accumul8 gives producers time-savings for one of farmings biggest jobs. The Accumul8 is your solution for handling bales efficiently - saving you time and man power. You can now handle eight, ten or twelv...

Tubeline Stationary Chainless BaleFeeders are ideal for custom rebaling operations. The units allow you to take large rounds off your field before the weather turns gray, and reprocess them as needed to suit customer...

Tubeline Stationary Chainless BaleFeeders are ideal for custom rebaling operations. The units allow you to take large rounds off your field before the weather turns gray, and reprocess them as needed to suit customer...

The BF8000 SL is designed to feed out round bales up to 6’ in diameter and weighing up to 2,500 lbs. The BF8000SL is equipped with a hydraulic loading arm and two prong bale spear, to lift and place the bale on...

The BOSS 1 is a large square bale processor that mounts on your skidsteer, tractor loader, or telehandler combining adaptability with accessibility. The BOSS 1 allows you to bed in tight spots that are nearly impossi...

The BOSS 1 is a large square bale processor that mounts on your skidsteer, tractor loader, or telehandler combining adaptability with accessibility. The BOSS 1 allows you to bed in tight spots that are nearly impossi...

The BOSS 1 is a large square bale processor that mounts on your skidsteer, tractor loader, or telehandler combining adaptability with accessibility. The BOSS 1 allows you to bed in tight spots that are nearly impossi...

The BOSS 1 is a large square bale processor that mounts on your skidsteer, tractor loader, or telehandler combining adaptability with accessibility. The BOSS 1 allows you to bed in tight spots that are nearly impossi...

The BOSS 1 is a large square bale processor that mounts on your skidsteer, tractor loader, or telehandler combining adaptability with accessibility. The BOSS 1 allows you to bed in tight spots that are nearly impossi...

The Bale BOSS 2 is the perfect tool for all of your large square bale processing needs. From bedding to feeding, the Boss 2 can manage it all  ...

The Bale BOSS 2 is the perfect tool for all of your large square bale processing needs. From bedding to feeding, the Boss 2 can manage it all  ...

Providing increased capacity, the Bale BOSS 4 can carry up to four 4x4x9 bales making it ideal for large feed lots or large operations where bales may need to be hauled daily  ...

The Bale BOSS R is built with the same versatility and quality you’ve come to expect from the Bale BOSS family. Bale BOSS R holds one round bale up to 4 feet wide and up to 6 feet in diameter  ...

The NITRO spreader from Tubeline originally started with the 450, 600, and 750 models followed by the 950, 950 Tri-Axle, and 1050 models shortly after the initial product launch. Developed with features to ensure com...

Responding to market demand the NITRO Rancher Series was developed to ensure smaller operations get the same metering in a format tailored to them. NITRO RS spreaders are ideal for farmers trying to keep their yards ...

Responding to market demand the NITRO Rancher Series was developed to ensure smaller operations get the same metering in a format tailored to them. NITRO RS spreaders are ideal for farmers trying to keep their yards ...

The NITRO spreader from Tubeline originally started with the 450, 600, and 750 models followed by the 950 model shortly after the initial product launch. Developed with features to ensure commercial readiness these s...

Responding to market demand the NITRO Rancher Series was developed to ensure smaller operations get the same metering in a format tailored to them. NITRO RS spreaders are ideal for farmers trying to keep their yards ...

The NITRO spreader from Tubeline originally started with the 450, 600, and 750 models followed by the 950 model shortly after the initial product launch. Developed with features to ensure commercial readiness these s...

Responding to market demand the NITRO Rancher Series was developed to ensure smaller operations get the same metering in a format tailored to them. NITRO RS spreaders are ideal for farmers trying to keep their yards ...

Responding to market demand the NITRO Rancher Series was developed to ensure smaller operations get the same metering in a format tailored to them. NITRO RS spreaders are ideal for farmers trying to keep their yards clea...

The NITRO spreader from Tubeline originally started with the 450, 600, and 750 models followed by the 950 model shortly after the initial product launch. Developed with features to ensure commercial readiness these s...

The NITRO spreader from Tubeline originally started with the 450, 600, and 750 models followed by the 950 model shortly after the initial product launch. Developed with features to ensure commercial readiness these s...

Nitro 950TRI             ...

The TechnoBale's fully adjustable arm is designed to give the bale a spin before picking it up, so you can follow the path of the baler without time-consuming and damaging cross-tracking. You can adjust everythin...