Bach Run Equipment

        Side Shift Pallet Fork   Hydraulic carriage side shift  16" travel (8" right or left)  Adjustable tines           ...

Silage Facer - Bucket Mount   Minimum 20 GPM required  Maximum flow 40 GPM  Facing drum mounted on bucket  400 Brinell high tensile steel teeth on drum  Dual drive motors  Heavy du...

Silage Facer - Frame Mount   Minimum 20 GPM required  Maximum flow 40 GPM  Facing drum mounted on a 4 ft frame  400 Brinell high tensile steel teeth on drum  Includes hose kit and flat-...

Silage Grapple Bucket   Heavy duty grapple integrated into the bucket design  Strategic pivoting arc design on the grapple for more power and less disturbance of the bunk silo face  3 X 16 cylind...

Single Arm Log Grapple   Removable log grapple for pallet forks  Clamps onto Class II or III fork frame (walk through guards only)  C/w Hydraulic cylinder           ...

Single Prong Bale Spear   Kverneland tine  Easy stabbing & removal  2000 lbs capacity @ 24" L.C.  Available with 39" or 49" tine  Two stabilizer tines  Approxima...

Single Prong Bucket Spear   Kverneland tine  2000 lbs capacity @ 24" L.C.  Adaptable to most buckets  No tools or bolts needed  Comes with chain & tightener  Approximate w...

Single Three Point Hitch Spear   Reese receiver / ball hitch (Ball hitch not included)  Fits both CAT I & II  Kverneland tine  2 stabilizer tines  2000 lbs capacity @ 24" L.C.&...

       Skidsteer Grader   Push-pull design for grading in forward or reverse  Pneumatic swivel wheels on oscillating front axle  Extendable front axle bolster for better stabi...

Square Bale Grapple (BG6000)   Same specs and design as round bale grapple with arms to accept square bales 4 - 6 ft long and round bales 5-6 ft diameter  Opens up to 84"  Approximate weight...

Square Bale Squeeze (BG7000)   86" extended – 30" Retracted  Arms are 50” long, 20” tall  2-½" x 28" stroke cylinder  Slim brace arm design allow...

      Standard (Front End Loader) Bucket & Regular Utility Grapple   Standard (Front End Loader) Bucket & Regular Utility Grapple  Opens up to 70"  Comes with 2-&frac1...

       Standard (Skidsteer) Bucket & Regular Utility Grapple   Standard (Skidsteer) Bucket & Regular Utility Grapple  Opens up to 70"  Comes with 2-½"...

        Standard Front End Loader Bucket - HEAVY DUTY   HEAVY DUTY  ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top...

        Standard Front End Loader Bucket - REGULAR DUTY   REGULAR DUTY  3/16" material, ¼" end plates  ¾ X 4 bevelled cutting edge  Reinforced top...

Standard Skidsteer Bucket & Skidsteer Grapple   Designed for use on skidsteers with limited clearance for grapple arms  Comes with 2-1/2" x 8" cylinders         ...

       Standard Skidsteer Bucket - HEAVY DUTY   HEAVY DUTY  ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top lip&nbs...

        Standard Skidsteer Bucket - Long Lip (Heavy Duty)   1/4" material, 1/4" end plates  3/4 X 6 bevelled cutting edge  Reinforced top lip  40" deep, 24...

      Standard Skidsteer Bucket - REGULAR DUTY   REGULAR DUTY  3/16" material, ¼" end plates  ¾ X 4 bevelled cutting edge  Reinforced top lip...

      Stone Fork (Cranked Kverneland Tine)   39" Conus II cranked Kverneland tines (32" useable length)  Tines installed on 4" centres  Ruggedly built  Heavy du...

       Stone Fork (Landscape with Power Rake)   ¾" shaft diameter  1-¾" spacing between tines  Points are ½" thick, 400 Brinell high streng...

     Stone Fork (Retainer Style Tine) - HEAVY DUTY   HEAVY DUTY  1-¾" shaft diameter  2-¾" spacing between tines  Points are ¾" thick, 400 ...

   Stone Fork (Retainer Style Tine) COMPACT DUTY   1" Shaft diameter  2-½" spacing between tines  Points are ⅝" thick, 400 Brinell high strength steel  23&q...

   Stone Fork (Retainer Style Tine) REGULAR DUTY   REGULAR DUTY  1-¼" shaft diameter  2-½" spacing between tines  Points are 5/8" thick, 400 Brinell hi...

  Stone Fork (Retainer Style Tine) with Split Grapple - HEAVY DUTY   HEAVY DUTY - UP TO 9500 LB CAPACITY  Two independent grapples  Ideal for brush & rock clean up  Ideal for awkwar...

 Stone Fork (Retainer Style Tine) with Split Grapple - REGULAR DUTY   REGULAR DUTY - UP TO 5500 LB CAPACITY  Two independent grapples  Ideal for brush & rock clean up  Ideal for awk...

       Telescopic Handler Bucket - HIGH VOLUME   ¼" material, ¼" end plates  3/4 X 6 bevelled cutting edge  Reinforced top lip  47" deep, 41&...

       Telescopic Handler Bucket - EXTRA HIGH VOLUME   ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top lip  55"...

        Telescopic Handler Bucket - STANDARD   3/16" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top lip  43" deep, 35&q...

       Three Point Hitch Adaptor   Adapter attaches to loader then allows you to hook up to three point hitch equipment  Bottom two arms slide for easy hook-up  Comes with Ree...

Three Prong Bale Spear   Kverneland tines @ 23" spacing  Made to handle large 4' x 4' x 8' square bales  Not to be used for carrying 2 bales stacked on top of each other  Av...

Three Prong Bale Spear c/w Guard   Kverneland tines @ 23" spacing  Made to handle large 4' x 4' x 8' square bales  Available with 32", 39" or 49" tines  Frame...

Three Prong Bale Spear c/w Adjustable Guard   50" high frame with adjustable guard posts for safe handling of large square bales up to 3 high  Safety foot for roll over protection while in storag...

       Tilt Attachment   Great for Landscapers  Mounts between skidsteers and buckets with universal hitch  Hydraulic Tilt 18° left and right  5500lb capacity  &...

Tooth Bar Bolt-on  Designed to fit HLA bucket with tapered end plates  Easy to remove replaceable teeth           ...

        Trailer Hitch 2 inch Receiver   2" Receiver  Ideal for moving light trailers around the yard  Ball hitch mount on top of frame for moving goose neck trailer&...

         Tree Spade   Ideal for transplanting trees and shrubbery  Scoop made from ¼" material  33" wide  48" deep  Note: For skidsteers o...

       Weld-on Kits   Weld-on kits are one or two pieces, depending on loader mount configuration  ...

4 Wheel Model      8 ton wagon gear  Quick hitch tongue  Standard reach length 6' 7"  Wheel Base adjustable 7'-11'  Safety chain (3/8" GR. 70)  &n...

4 Wheel Model      10 ton wagon gear  Quick hitch tongue  Standard reach length 11'  Wheel Base adjustable 8' 8" - 11' 2"  Safety chain (3/8" GR. ...

4 Wheel Model      Four Wheel Steer  6 ton wagon gear  Quick hitch tongue  Standard reach length 11'  Wheel Base Fixed 11' 2"  Safety chain (3/8" GR. ...

4 Wheel Model      10 ton wagon gear  Road Flex Suspension  Quick hitch tongue  Standard reach length 11'  Wheel Base adjustable 8' 8" - 11' 2"  S...

4 Wheel Model      12 ton wagon gear  Quick hitch tongue  Standard reach length 11'  Wheel Base adjustable 8' 8" - 11' 2"  Safety chain (3/8" GR. ...

4 Wheel Model      12 ton wagon gear  Road Flex Suspension  Quick hitch tongue  Standard reach length 11'  Wheel Base adjustable 8' 8" - 11' 2"  S...

6 Wheel Model      12 ton tandem wagon gear  Quick hitch tongue  Standard reach length 11'  Wheel Base adjustable 8' 8" - 11' 2"  Safety chain (3/8&quo...

6 Wheel Model      14 ton tandem wagon gear  Quick hitch tongue  Standard reach length 11'  Wheel Base adjustable 8' 8" - 11' 2"  Safety chain (1/2&quo...

4 Wheel Model      14 ton wagon gear  Quick hitch tongue  Standard reach length 11'  Wheel Base adjustable 8' 8" - 11' 2"  Safety chain (1/2" GR. ...

4 Wheel Model      15 ton HD wagon gear  Quick hitch tongue  Rocking bolster  Standard reach length 10'  Wheel base adjustable 10' 7" - 12' 1"  Di...

4 Wheel Model      15 ton HD wagon gear  Road Flex Suspension  Quick hitch tongue  Standard reach length 10'  Wheel base adjustable 10' 7" - 12' 1"&nbs...

  2PH Dolly         The new trailer Dolly from Horst provides a safe economical platform for transporting 2PH implements.  Capacity 5,000 LBS.  Ball Hitch (2-5/16)  7 pin R...

8 Wheel Quadsteer Model      20 ton double tandem wagon gear  Quick hitch tongue  Front Tandem has quad steering c/w bearings on king pins  Standard reach length 11'  Sa...

8 Wheel Quadsteer Model      20 ton double tandem wagon gear  Road Flex Suspension  Quick hitch tongue  Front Tandem has quad steering c/w bearings on king pins  Standard re...

6 Wheel Model      18 ton tandem wagon gear  Quick hitch tongue  Standard reach length 11'  Wheel base Adjustable 8' 8" - 11' 2"  Safety chain (1/2&quo...

6 Wheel Model      18 ton tandem wagon gear  Road Flex Suspension  Quick hitch tongue  Standard reach length 11'  Wheel base Adjustable 8' 8" - 11' 2"&...

4 Wheel Model      20 ton HD wagon gear  Quick hitch tongue  Rocking bolster  Standard reach length 10'  Wheel base adjustable 10' 7" - 12' 1"  Di...

4 Wheel Model      20 ton HD wagon gear  Quick hitch tongue  Standard reach length 10'  Wheel base adjustable 10' 7" - 12' 1"  Disc brake flanges ...

4 Wheel Model      20 ton HD wagon gear  Road Flex Suspension  Quick hitch tongue  Standard reach length 10'  Wheel base adjustable 10' 7" - 12' 1"&nbs...

4 Wheel Model      24 ton HD wagon gear  Quick hitch tongue  Rocking bolster  Standard reach length 10'  Wheel base adjustable 10' 7" - 12' 1"  Di...

4 Wheel Model      24 ton HD wagon gear  Road Flex Suspension  Quick hitch tongue  Standard reach length 10'  Wheel base adjustable 10' 7" - 12' 1"&nbs...

6 Wheel Model      22 ton HD tandem wagon gear  Quick hitch tongue  Rocking Bolster  Standard reach length 10'  Wheel base adjustable 10' 7" - 12' 1"&n...

6 Wheel Model      22 ton HD tandem wagon gear  Road Flex Suspension  Quick hitch tongue  Standard reach length 10'  Wheel base adjustable 10' 7" - 12' 1&qu...

6 Wheel Model      30 ton HD tandem wagon gear  Quick hitch tongue  Rocking Bolster  Standard reach length 10'  Wheel base adjustable 10' 7" - 12' 1"&n...

8 Wheel Quadsteer Model      40 ton double tandem wagon gear  Quick hitch tongue  Front Tandem has quad steering c/w bearings on king pins  Rocking Bolster  Standard reach l...

  Regular Duty 2 Wheel Steer         Tapered roller bearings on king pins for absolute no sway trailing  Includes 2 Tool Free Configurable Standard Pads  2 Ratchet straps to ...

  Regular Duty 2 Wheel Steer         Tapered roller bearings on king pins for absolute no sway trailing  Includes 2 tool free configurable standard pads  2 Ratchet straps to se...

  Regular Duty 2 Wheel Steer         Tapered roller bearings on king pins for absolute no sway trailing  Includes 2 tool free configurable standard pads  2 Ratchet straps to se...

Contour 4 Wheel Steer      Tapered roller bearings on king pins for absolute no sway trailing  Includes 2 tool free configurable universal pads  2 Ratchet straps to secure load  ...

Contour 4 Wheel Steer      Tapered roller bearings on king pins for absolute no sway trailing  Includes 2 tool free configurable universal pads  2 Ratchet straps to secure load  ...

Contour 4 Wheel Steer      Tapered roller bearings on king pins for absolute no sway trailing  Includes 2 tool free configurable universal pads  2 Ratchet straps to secure load  ...

Contour 4 Wheel Steering Rear Electric Brakes      Tapered roller bearings on king pins for absolute no sway trailing  Includes 2 tool free configurable universal pads  2 Ratchet stra...