Teagle Tomahawk 505FSM

Specifications

Model	Tomahawk 505FSM	Category Name	Livestock & Feeding	Year	2024
Stock Number	701	Sale Type	New	Manufacturer	Teagle
Price	Contact for price CAD

Description

Tomahawk 505FSM

Process short material for TMR, Cubicles, Poultry Bedding or Biomass

The rear hydraulically angled slide allows constant material feed when the mill is operating in a stationary position. Output is increased up to 4 t/hr by eliminating stopping and starting of the drum/machine to load the bale.

Configurations

Tomahawk 404M - Suitable for 1.2m (4') diameter bales.
Tomahawk 505M - Suitable for 1.5m (5') diameter bales.
Tomahawk 505XLM - Suitable for 1.5m (5') diameter bales and full size Hesston bales.

Various drum extensions are available for ease of operation or to accommodate larger rectangular bales.

The 404M/505M/505XLM range is suitable for dry material only, and will not cut silage as it will block the mill sieve.

British built and backed

For your peace of mind Tomahawks are backed by an efficient after sales service from our production facility in Cornwall, England.

The Tomahawk Drum models are economical, simple and robust. There are no gearboxes, with the drive to the rotor being direct from the tractor, a hydraulic motor is used to rotate the drum. Due to their simplicity and strength, customers can expect a long service life from their Tomahawk.

PRODUCT SPECIFICATIONS

Specification	505FSM
Drum Diameter	72"
Maximum Round Bale Diameter	62"
Maximum Rectangular Bale Size	48" x 48"
Height Overall with machine on ground	102"
Width with chutes closed	80"
Lower chute discharge height	22"
Upper chute discharge height	50"
Length Overall	162"
Transport Width	80"
Operating Width	123"
Straw Giraffe Chute discharge height	72"
Weight.	3055 lb
PTO power required	120HP
Straw	Short Chop
Feed Baled Silage	No
Feed Clamp Silage	No
Bed Cubicles / Straw Processing	Yes
Bed Loose Housing	No

ADDITIONAL OPTIONS

Trailed Chassis

Accommodates all models in the Drum Tomahawk range. Available with a choice of ring, ball or clevis hitch. Lower link beam kit also available.

Choice of material chop length

Length of material is determined by the screen. The nature of the material has some effect upon actual shredded length and some variation is likely to occur. We offer a variety of screen sizes 10, 13, 15, 18, 21, 25, 28, 36 holes and 50mm and 120mm slotted. All made from durable Hardox.

Hydraulic Top Link

Heavy duty, strong enough to allow you to change the angle of the machine whilst the drum is loaded.

Straw Giraffe Chute

Only suitable for dry material. It will blow long straw up to 40' at 1000rpm.

Quick Hitch A-Frame

Quick attach A-Frame, allows quick coupling of the Tomahawk onto the tractor.

Electric Drive

Electric motor drive options available. Contact us for more information.

Various Drum Lengths

5' and 6' long drums are also available so a second bale can be loaded before the first is finished, to maintain a consistent feed rate and chop length. 8' long drum x 5' diameter, available only on the Tomahawk 404 - 404M - 4040.

Hydraulic Deflector

To control delivery, available on all Giraffe Chutes.

9' Long Drum 505XLM Model

Takes full length rectangular bales 4' x 4' or two round bales. Centre supports for strength and reliability.

Swivel Giraffe Chute

Discharge height on 505M 3m (10') (if Tomahawk is lifted 30cm (12") above ground). Dry material only. Optional motor kit available.

LITERATURE

Name	Link
Tomahawk Drum Brochure	Download
Tomahawk 505FSM leaflet	Download
2025 Product Guide	Download