Compact Brush Grapple w/ Electric Actuator Opens to 38" wide from ground to point of grapple Tine tips and grapple tips are AR400 material...

 Round Bale Grapple (BG4000) Designed for gentle handling of heavy wrapped silage bales Lockable arms, one arm can be locked in a fixed position...

Square Bale Grapple (BG6000) Same specs and design as round bale grapple with arms to accept square bales 4 - 6 ft long and round bales 5-6 ft...

Square Bale Squeeze (BG7000) 86" extended – 30" Retracted Arms are 50” long, 20” tall 2-½" x 28" stroke cylinder Slim brace arm design...

Compact Utility Grapple To be fitted on models SBC, MBC & LDFE Heavy duty welded cylinder Opens up to 37-½" ...

Regular Utility Grapple Can be fitted to models SB, SBHV, MB, MBHV, MFE, & SFR Accommodates 4ft round bales Works equally well on other...

Large Utility Grapple Can be fitted to models SB, SBHV, MB, MBHV, MBHVX, & THMB (Does not fit THMBHV & THMBHVX buckets) Specific heavy...

Extra Large Utility Grapple Can be fitted to THMBHV & THMBHVX buckets Specific heavy duty design for handling large round and square bales...

Single Arm Log Grapple Removable log grapple for pallet forks Clamps onto Class II or III fork frame (walk through guards only) C/w Hydraulic...

Log Grapple Grapple version of HD55/HD75 pallet fork 42" solid fork lift tines 5500/7500 lbs capacity C/w HD Cylinders ...

Debris Grapple Fork Two independent grapples Replaceable tempered tines eliminate the need for a support bar at points which reduces lodging and...

Manure Fork with Cranked Kverneland Tine & Skidsteer Grapple Designed for use on skidsteers with limited clearance for grapple arms Comes...

Regular Duty Stone Fork with Retainer Style Tine & Skidsteer Grapple Designed for use on skidsteers with limited clearance for grapple arms...

Low Profile Skidsteer Bucket & Skidsteer Grapple Designed for use on skidsteers with limited clearance for grapple arms Comes with 2-1/2" x...

Standard Skidsteer Bucket & Skidsteer Grapple Designed for use on skidsteers with limited clearance for grapple arms Comes with 2-1/2" x 8"...

Scrap Grapple Bucket (Skidsteer) Two independent grapples 1/4" material, 3/8" end plates 3/4 X 6 bevelled cutting edge Ideal for awkward abrasive...

Compact Scrap Grapple Bucket (Skidsteer) 3/16" material, 1/4" end plates 3/4 X 4 bevelled cutting edge Single grapple arm 26" overall height 26"...

Compact Brush Grapple Opens to 38" wide from ground to point of grapple Tine tips and grapple tips are AR400 material Tine spacing 6" on center...

Brush Grapple Opens to 48" wide from ground to point of grapple Tine tips and grapple tips are AR400 material Tine spacing 5-1/2" between...

Light Duty Root Rake c/w Hydraulic Grapple Light weight with rugged design for compact loaders 28" overall height when closed 7-3/8" centre to...